|
Avocent SPC420 Power Control Device - SPC420V-1, SPC420V-2
The Avocent SPC420 Power
Control Device reduces operational expenses by virtually eliminating
the need for costly on-site visits or service calls to reboot or power
cycle servers and other network devices at remote offices. It enables
remote power management for rapid and effective power control from any
location.
SPC420 Power Control Device Applications
• Manage HP iLO, IBM RSA, Dell DRAC, IPMI, and others from a single user
interface
• Centralize authentication, logging, health monitoring and control of
servers
• Provide the security needed to effectively manage service processors
remotely
SPC420 Power Control Device Benefits
• Reduce the cost of deploying, monitoring and
troubleshooting servers
• Reduce the number of IP addresses and Ethernet switch ports required
for service processors
• Decrease the time to access, monitor and control servers by using a
single login and user interface
• Eliminate security concerns associated with remote management of service
processors
• Restrict user access to specific service processor features: power,
sensors, console, Web
SPC420 Power Control Device Features
Operating System
• Linux Security
• SSHv1 and SSHv2
• Local, RADIUS, TACACS+, LDAP, NIS, Active Directory, SMB and Kerberos
authentication
• Token-based strong authentication (RSA SecurID)
• Local fallback user authentication (remote failure)
• Group authorization from authentication servers
• System event logs
• VPN through PPTP or IPSec
User Interface
• Web Management Interface (HTTP/HTTPS)
• Configuration wizard for first time Web users
• Command line interface (Linux Shell)
• SSH commands for multi-vendor device management
• SNMP proxy
• Security profiles for quick settings of the security features
• NTP for time server synchronization
• Optional integrated power management with Cyclades PM IPDU
• Supports service processor management software from most server vendors
Service Processor Management
• Simultaneous access to the same service processor
• Serial console over LAN
• Restricted user access to power, sensors, console, event logs or native
Web
• DHCP for dynamic IP address assignment
• Ability to define custom profiles for unsupported service processors
Upgrades
• Upgrades available on FTP site
• Flash upgradeable
• TFTP support for network boot
|
|
|
Avocent SPC420 Power Control Devices
| Part Number |
Description |
| Avocent
SPC420V-1 |
4 Port Vertical 115V, 15A w/Nema 5-15P Plug & Nema 5-15R Outlets |
| Avocent
SPC420V-2 |
4 Port Vertical 208V, 15A w/Nema 6-15P Plug & IEC C-13 Outlets |
Avocent SPC420 Power Control Device Power
Cords
| Power Cords |
Description |
| Avocent CBL0015 |
Power Cord 115V, 20A IEC C-19 w/ 5-20P plug |
| Avocent
CBL0016 |
Power Cord 208V, 15A IEC C-19 w/ 6-15P plug |
| Avocent
CBL0017 |
Power Cord 208V, 20A IEC C-19 w/ 6-20P plug |
| Avocent
CBL0018 |
Power Cord 115V, 20A IEC C-19 w/ L5-20P Twist Lock Plug |
| Avocent
CBL0019 |
Power Cord 208V, 20A IEC C-19 w / L6-20P Twist Lock Plug |
| Avocent CBL0020 |
Power Cord IEC C-13 to C-14 (for use with 208V units) |
Avocent SPC420 Power Control Device |
